704-486-2384 | Mon-Fri: 9am-6pm EST
704-486-2384
support@gameroomempire.com
Mon-Fri: 9am-6pm EST
Overview
Godzilla Kaiju Wars Deluxe is the Non-VR build of Raw Thrills' Godzilla cabinet, licensed from Toho Co., Ltd. and running 2025 software. The format is what separates it from a fixed sit-down: two 65-inch screens carry the Tokyo skyline while the cabinet sits on a motion platform that moves with the action on screen. Play runs through five levels and finishes in the Final Battle boss showdown, so a session has a stated ending rather than an open score chase.
The installed cabinet measures 60 inches wide by 107 inches deep and stands 137 inches tall with the marquee fitted, 112 inches without it. Power arrives through two inlets: 10A each at 120V/60Hz for 20A total, or 5A each at 230V/50Hz for 10A total. Raw Thrills offers the machine in amusement play with Redemption Mode as an option. Item number BETM 029199N.
Construction
The Deluxe carries two 65-inch screens, and the cabinet is 60 inches wide overall. That is narrower than two 65-inch panels set side by side, so the second screen buys viewing area without buying floor width. An operator gets twin-screen display area inside a five-foot frontage.
This is a motion unit: the platform moves the player in time with what happens on the screens. The 107-inch depth follows from that. A moving platform occupies more floor front to back than a static seat, and 8 feet 11 inches is the published figure for the installed machine, not a number that can be trimmed on site.
Both heights are published because the marquee accounts for 25 inches of the total. Assembled, the cabinet needs 11 feet 5 inches of clear height above the bay. The 112-inch figure is the one that governs getting it into place, since 9 feet 4 inches will pass under soffits, ductwork, and door headers that the finished cabinet will not.
Sixty inches by 107 inches is 44.6 square feet of floor before any player clearance. The two numbers are unequal in a way that decides placement: at five feet wide the cabinet takes an ordinary frontage, but at 8 feet 11 inches deep it reaches well back into the room. Against a wall it uses depth that aisle-facing cabinets waste; in the open it interrupts traffic.
Power enters through two inlets rather than one. At 120V/60Hz each inlet draws 10A for 20A total; at 230V/50Hz each draws 5A for 10A total. Two inlets means two receptacles at the bay, and on a 120V install a single 20A branch circuit would be fully loaded by this cabinet alone, with nothing left for a neighboring machine.
Raw Thrills lists Redemption Mode as an option alongside standard amusement play. For a location running a ticket economy, that decides whether the cabinet earns on its own or feeds the prize counter with the rest of the floor. Operators buying for a mixed room should specify which mode they want the machine set up for.
Buyer's Guide
Height is the first thing to settle, and the number to measure against is 137 inches. An 8-foot ceiling clears neither configuration of this cabinet, and a 10-foot ceiling clears it only with the marquee off. Measure the intended bay rather than the room average, then measure again at the sprinkler heads, light fixtures, and any duct run crossing that spot. The 112-inch figure is worth writing down separately: it is the height that has to pass through the building to reach the bay, and a 9-foot-4-inch clearance on the route in is a different question from an 11-foot-5-inch clearance at the destination.
Cabinet format is the second decision. A motion platform commits 107 inches of depth, and that depth is what buys the platform movement the game is built around. A buyer comparing this against a fixed sit-down running similar content is trading floor depth for the platform movement. Note that the published dimensions here are the installed location footprint, not crate sizes, so a receiving plan needs shipping figures confirmed separately rather than derived from these.
Electrical is where installs stall. Two inlets at 10A each on 120V/60Hz is 20A total for one machine, so the bay needs two receptacles and enough branch-circuit capacity that the cabinet is not sitting at the limit of a shared 20A circuit. On a 230V/50Hz supply the same cabinet draws 5A per inlet, 10A total, which is why European and other 230V rooms have an easier time fitting it into existing distribution. Confirm which voltage the unit is configured for and what the bay is fed by before the machine arrives, not after.
On the earnings side, judge this cabinet on the licence and the structure of play. Godzilla Kaiju Wars is licensed from Toho Co., Ltd., with software copyright Raw Thrills, Inc., 2025, so the marquee draws players who already know the name. The game runs five progressive, story-oriented levels and ends in the Final Battle boss showdown, which gives players a completion goal to come back for rather than a leaderboard alone. Add the optional Redemption Mode and the same machine can be positioned as a standalone attraction or as part of a ticket floor.
Specifications
Cabinet & Footprint
Display
Electrical
Gameplay
General
FAQ
How much ceiling height does Godzilla Kaiju Wars Deluxe need?
137 inches, or 11 feet 5 inches, with the marquee fitted. Without the marquee the cabinet stands 112 inches, or 9 feet 4 inches. Measure the specific bay, including sprinkler heads and light fixtures, rather than the room's nominal ceiling height.
Is this the VR version of Godzilla Kaiju Wars?
No. This is the Non-VR Deluxe cabinet, item number BETM 029199N. Players watch the action on two 65-inch screens from a motion platform cabinet, with no headset involved. Every specification on this page applies to the Deluxe only.
What are the electrical requirements?
The cabinet has two power inlets. On 120V/60Hz each inlet draws 10A, for 20A total. On 230V/50Hz each inlet draws 5A, for 10A total. Plan for two receptacles at the bay and confirm the branch-circuit capacity feeding it, since 20A total on a 120V supply leaves no headroom on a single 20A circuit.
Can the cabinet be run as a redemption piece?
Yes. Redemption Mode is offered as an option alongside standard amusement play, so the machine can be set up for a ticket floor or run purely as an attraction. Specify the mode you want when ordering.
What does a full play session cover?
Five progressive, story-oriented levels followed by the Final Battle boss showdown. Because the game has a defined ending, players have a completion goal to return for, which is the repeat-play case Raw Thrills makes for the title.
What warranty comes with the machine?
One (1) year on game electronics, covering the computer, monitor PCB, and electronic PCBs, and ninety (90) days on all other game components. Both periods run from date of purchase. Betson Imperial is a Raw Thrills factory-authorized service center and honors the warranty; parts and repairs are processed through Betson by advance replacement or an RMA.
placeholder