Skip to content

Stranger Things Arcade Redemption Game

by Betson
SKU BETM STA
Original price $34,862.50 - Original price $34,862.50
Original price
$34,862.50
$34,862.50 - $34,862.50
Current price $34,862.50
Shipping & Delivery
Warranty
Authorized Betson Dealer

Official partners with all our brands.

No Sales Tax

We pay the sales tax to pass the savings on to you.

Price Match Policy

Find it cheaper somewhere else? Let us know.

Financing

Buy now and pay later with our financing options.

Overview

Stranger Things Arcade by Raw Thrills, Built for Four Players Turn your arcade upside down.

The licence leads here. Raw Thrills holds Stranger Things from Netflix and spends it on a physical ball-throwing cabinet rather than a screen-and-buttons upright. One to four players throw at Demogorgons, Demobats, Demodogs and Vecna himself across locations from the series, with the show's characters and its soundtrack carrying the play. Raw Thrills reads every throw with its own sensing system, Thrill-Scan, and credits it with pinpoint accuracy, which is the one problem a throwing game has to solve before anything else about it matters.

The size follows from a game four people play standing up. Installed, the cabinet is 94 inches wide, 104 inches deep and 118 inches tall, and it weighs 2,231 pounds. Raw Thrills also publishes a separate recommended minimum floor space of 96 by 148 inches with 120 inches of height, which is the number to plan a room against. It arrives on two pallets weighing 1,305 and 926 pounds. Power is 120V/60Hz at 5A, or 230V/50/60Hz at 3A. Raw Thrills built the game for all ages.


Construction

What Raw Thrills Built Into the Cabinet

01Thrill-Scan Ball Sensing

A throwing game scores nothing it cannot detect. Raw Thrills' answer is Thrill-Scan, a proprietary ball sensing system the company credits with pinpoint accuracy, fitted to a cabinet it describes as engineered for maximum uptime. On a busy location that distinction shows up at the counter: a game that misreads a hit produces arguments, and a game that reads every ball keeps the line moving.

02Four Players Across 94 Inches

The cabinet installs at 94 inches wide and 104 inches deep and runs one to four players in the same game. That frontage is what four simultaneous throwing positions cost, and no narrower configuration is published, so the 94 inches is what the game occupies whether one person is playing or four. Plan the floor against the four-player width, not against a hoped-for compact version.

03Main Cabinet and Pedestal

The game ships as two palletized sections. The main cabinet pallet measures 48 by 97 by 83 inches and weighs 1,305 pounds; the pedestal pallet measures 37 by 95 by 86 inches and weighs 926 pounds. Added together they come to 2,231 pounds, the same figure as the installed weight, so almost none of what arrives on the truck is packaging that leaves again.

04Netflix Licence and the Hawkins Roster

Netflix licensed Stranger Things for this cabinet and the software is copyright 2026 Raw Thrills, Inc. The game uses the series' characters, its locations and its soundtrack, and the opposition is drawn from the show: Demogorgons, Demobats, Demodogs and Vecna. Recognition arrives with the marquee instead of having to be built, and Raw Thrills aimed the game at all ages rather than at a horror audience.

05120V and 230V Ratings

The cabinet publishes two service ratings: 120V/60Hz at 5A, and 230V/50/60Hz at 3A. Five amps at 120V is a modest draw for a machine of this mass, and it is a single figure rather than a pair of inlets to feed separately, so one circuit sized to the published rating covers the game.

06118 Inches of Installed Height

Assembled, the game stands 118 inches tall, and the recommended minimum allows 120 inches above the floor. That is 9 feet 10 inches of cabinet asking for a 10-foot ceiling. Height is the first specification to check on this game, ahead of width and depth, because a room either has the clearance or it does not.


Buyer's Guide

How to Size a Room and a Delivery for This Cabinet

Raw Thrills publishes two sets of dimensions for this game, and they are not interchangeable. The installed dimensions, 94 by 104 by 118 inches, describe the machine. The recommended minimum floor space, 96 by 148 inches with 120 inches of height, describes the space to reserve for it. The gap between them is 44 inches of depth plus 2 inches of width and 2 inches of height. Most arcade cabinets publish only the first figure, so anyone used to reading spec sheets can plan against the cabinet and come up nearly four feet short in depth on the day it lands.

Check height twice: once for the room, once for the route in. The finished game is 118 inches tall against a published 120-inch allowance, so a 10-foot ceiling is the working minimum and an 8-foot ceiling is out of the question, sprinklers and ductwork included. The pallets are lower but still tall, at 83 inches for the main cabinet and 86 inches for the pedestal. That is more than 7 feet before a pallet jack lifts anything, which puts low door headers, garage openings and elevator cabs in the same category of thing to measure.

Two pallets rather than one changes what receiving has to do. The main cabinet pallet is 48 inches wide at 1,305 pounds; the pedestal pallet is 37 inches wide at 926 pounds. Doors, corridors and turns should be measured against those two widths, not against the 94-inch installed width, because the game is not 94 inches wide until it is standing in the room. The 1,305-pound pallet is the one that sets the equipment list, and both pallets have to reach the same spot, so a route that works for the pedestal and not the main cabinet is not a route.

Weight matters after the delivery too. At 2,231 pounds spread over a 94 by 104 inch footprint, this is a fixed installation rather than a cabinet that gets nudged around when the floor plan changes, so settle sightlines, queuing space and traffic flow before it arrives. The electrical side asks for very little by comparison: 120V/60Hz at 5A domestically, or 230V/50/60Hz at 3A where a room is wired for it, published as one service rating per voltage.

Specifications

Stranger Things Arcade Specifications

Cabinet & Footprint

  • Installed Width94 in
  • Installed Depth104 in
  • Installed Height118 in (9 ft 10 in)
  • Installed Weight2,231 lbs
  • Recommended Minimum Floor Space96 in W x 148 in D x 120 in H
  • SectionsMain cabinet and pedestal

Shipping

  • Pallets2
  • Main Cabinet Pallet48 in W x 97 in D x 83 in H
  • Main Cabinet Pallet Weight1,305 lbs
  • Pedestal Pallet37 in W x 95 in D x 86 in H
  • Pedestal Pallet Weight926 lbs
  • Combined Shipping Weight2,231 lbs

Electrical

  • 120V Service120V / 60Hz, 5A
  • 230V Service230V / 50-60Hz, 3A

Gameplay

  • Players1 to 4
  • Play StyleBall throwing
  • Ball SensingThrill-Scan
  • OpponentsDemogorgons, Demobats, Demodogs, Vecna
  • AudienceAll ages

General

  • ManufacturerRaw Thrills
  • LicenceStranger Things, Netflix
  • Software Copyright2026 Raw Thrills, Inc.
  • Warranty, Game Electronics1 year from date of purchase
  • Warranty, Other Components90 days from date of purchase

FAQ

Questions Buyers Ask About This Cabinet

What kind of arcade game is Stranger Things Arcade?

A ball-throwing game for one to four players, built by Raw Thrills under licence from Netflix. Players throw at Demogorgons, Demobats, Demodogs and Vecna across locations from the series, with the show's characters and soundtrack in the game, and each throw is read by Raw Thrills' Thrill-Scan ball sensing system. Raw Thrills built it for all ages.

How much floor space does it need?

Reserve 96 inches of width, 148 inches of depth and 120 inches of height. That is Raw Thrills' published recommended minimum floor space, and it is separate from the installed dimensions of the machine itself, which are 94 inches wide, 104 inches deep and 118 inches tall. The allowance runs 44 inches deeper than the cabinet, so planning against the installed depth alone leaves the game short of room.

Will it fit in a room with 8-foot ceilings?

No. The game stands 118 inches tall installed, which is 9 feet 10 inches, and the published minimum height allowance is 120 inches. The position needs a 10-foot ceiling with nothing hanging into it, including light fixtures, ductwork and sprinkler heads.

How does it ship, and what does receiving need to handle?

On two pallets. The main cabinet pallet is 48 by 97 by 83 inches and weighs 1,305 pounds; the pedestal pallet is 37 by 95 by 86 inches and weighs 926 pounds. Both have to reach the installation point, and together they account for the game's full 2,231 pounds. Measure entry doors and corridors against the 48-inch and 37-inch pallet widths rather than the 94-inch installed width.

What are the electrical requirements?

120V/60Hz at 5A, or 230V/50/60Hz at 3A. Those are the two service ratings Raw Thrills publishes for the cabinet, and there is a single rating for each rather than separate figures for multiple inlets.

What does the warranty cover?

One (1) year on game electronics, meaning the computer, monitor PCB and electronic PCBs, and ninety (90) days on all other game components. Both periods run from date of purchase. Betson Imperial is a Raw Thrills factory-authorized service center and honors the warranty, and warranty parts and repairs are processed through Betson via advance replacement or an RMA.